How Much Does Chimney Chase Cover Replacement Cost in Minneapolis, MN?
In Minneapolis, chimney cap installation starts at $125, but that is not the chimney chase cover replacement cost: a cap and a chase cover are different parts. The replacement estimate needs to account for the cover and any surrounding damage that needs attention.
Our Starting Prices in Minneapolis
| Service | Price |
|---|---|
| Chimney Sweep | From $89 |
| Chimney Cleaning | From $89 |
| Chimney Inspection | From $39 |
| Chimney Cap Installation | From $125 |
| Chimney Liner Installation | From $899 |
| Gas Fireplace Service | From $49 |
Need help now? (612) 806-0154
What Chimney Chase Cover Replacement Cost Includes
Our listed prices do not give a separate starting amount for chimney chase cover replacement. The closest listed price is chimney cap installation from $125, but that price is for a different component and should not be used as the cost of replacing a chase cover.
A chase cover is the metal top that sits over a factory-built chimney chase, the framed enclosure around the flue. A chimney cap fits over the flue opening to help keep rain, animals and debris out. One does not replace the other, so identify which part is damaged before comparing estimates.
The cover’s dimensions, material and condition of the chase can affect the work involved. Damage to nearby parts may also need attention; ask for each recommended repair to be identified separately. You can compare listed services and our prices without treating a cap installation price as a chase cover quote.
Signs Your Chimney Chase Cover May Need Replacement
From the ground, look for visible changes without climbing onto the roof. These signs can point to a damaged cover, but they do not confirm the cause of a leak.
- Rust or holes — Rust patches, a hole or a visibly worn-through area can let water reach the chase below.
- Standing water or a sagging top — A low spot or a cover that looks bowed may not shed water properly. Do not press on it or try to reshape it from the roof.
- Water marks indoors — Stains near the chimney or dampness in the chase can signal water entry, but the source could also be another roof or chimney component.
- A loose edge or lifted section — A cover that appears to have shifted can expose the chase to weather. Keep clear of the roof and arrange an assessment rather than trying to fasten it yourself.
Repair or Replace a Damaged Chimney Chase Cover?
The right choice depends on whether the damage is limited to one area or the cover has deteriorated more broadly. A visible leak alone does not prove that the cover is the only problem.
A limited repair
This may fit a small, localized problem when the rest of the cover remains sound. Have the sweep check whether water has also affected the chase or nearby connections.
Full cover replacement
Replacement may be the better path when the cover has widespread rust, holes, distortion or recurring water entry. The new cover needs to fit the chase and leave the flue opening properly served by its separate cap.
Investigate another leak source
Water may be entering at a different chimney or roof component. Ask for the suspected entry point to be identified before approving cover replacement alone.
Need help now? (612) 806-0154
Seven Safe Checks Before You Book Chase Cover Work
These steps help you describe the issue and compare recommendations without getting onto the roof or dismantling chimney parts.
- Look from the ground — Use binoculars if you have them, and note rust, a bent edge, holes or a visible gap. Do not climb a ladder to inspect the roof.
- Check indoor areas near the chase — Look for fresh water marks, dampness or peeling material around the chimney enclosure. Note where you see it and whether the mark appears new.
- Photograph what you can see safely — Take photos from ground level and indoors. Check that the pictures show the location clearly; do not reach over an edge or step onto the roof for a closer view.
- Identify the chimney type if known — A chase cover belongs to a framed chimney enclosure, while a masonry chimney has a different top construction. Check old service records or describe the visible exterior rather than guessing.
- Note when the problem appears — Record whether you notice water after rain or see a change in the cover. This helps the sweep distinguish a possible water-entry issue from a general appearance concern.
- Ask what part is being recommended — Request a clear distinction between the chase cover, chimney cap and any other part proposed for repair. Check that the written recommendation names the work and its starting price, if one is listed.
- Book an assessment before attempting roof work — A loose or corroded metal cover can be unsafe to handle, and a roof-level check requires proper access. Use our chimney chase cover replacement service to arrange an assessment.
What Changes a Chase Cover Replacement Estimate?
The dimensions and shape of the chase matter because the replacement cover must fit the top. Material selection and the condition of the existing structure can also affect what work is needed; an estimate should make clear whether it covers only the cover or includes additional repairs.
Access matters as well. A technician needs to reach the roof safely and inspect the area around the cover. If the chase, flue area or adjacent roof components show damage, ask what was observed and whether that work is included or separate.
This post focuses on chase covers, not general chimney cleaning or sweeping costs. For a broader view of the types of work available, see how much chimney chase cover installation costs; installation and replacement describe related work but should not be treated as identical estimates.
Why a DIY Chase Cover Fix Can Make the Problem Worse
Do not climb onto the roof to patch, seal or fasten a chase cover. A poor fit or an improvised patch can leave openings for water, and working around a roof edge adds a fall risk.
Avoid sealing over a visible problem before its source is checked. Water may be entering at the chase cover, the chimney cap or another roof connection, so treating the first spot you notice can leave the leak unresolved. Call a chimney sweep when the cover is loose, rusted through, visibly distorted or associated with indoor water marks.
During an assessment, ask the sweep to identify the damaged component and separate any additional recommended repairs from the cover work. MN Chimney Sweep explains the work clearly and recommends only the services a homeowner needs.
Need help now? (612) 806-0154
How to Arrange a Chase Cover Assessment
Have the property address, a short description of the issue and any safe ground-level photos ready. Tell us whether you see rust, a loose edge or water indoors, and ask which parts the proposed work covers.
MN Chimney Sweep is open 24 hours a day, 7 days a week, and same-day service is available. To book, use contact us or call (612) 806-0154. Ask about the expected visit length when you arrange the assessment so you can plan around the appointment.
For an estimate that distinguishes replacement from other chimney work, request an assessment of the cover and surrounding area. The chase cover replacement service page has details about the related work.
Frequently asked questions
Is a chimney chase cover the same as a chimney cap?
No. The chase cover tops the framed enclosure around a factory-built chimney, while the chimney cap fits over the flue opening. If both appear damaged, ask for each part to be checked and identified separately.
Can I replace a chimney chase cover myself?
Roof-level cover work involves reaching and handling a large metal part at height, so do not climb up to inspect or replace it yourself. Arrange a chimney sweep assessment if the cover looks loose, rusted through or distorted.
Does a rusty chase cover always need replacement?
Not necessarily; a small affected area and widespread corrosion are different conditions. Have the cover and the surrounding chase checked before deciding between a repair and replacement.
Could a leak near the chimney come from somewhere other than the chase cover?
Yes. Water can enter at another chimney or roof component, so an indoor stain does not by itself identify the chase cover as the source. Ask the sweep to locate the likely entry point and explain any separate repairs.
Arrange a Chase Cover Assessment
Share what you see and book chimney chase cover service with MN Chimney Sweep at (612) 806-0154.