Chimney Water Repair
Chimney Leak Repair in Minneapolis, MN
Chimney leak repair in Minneapolis starts with finding where water enters, not just covering the stain. We assess the chimney and roof connection, identify the repair needed, and explain the work before it begins.
- Same-day service available
- Open 24 hours a day, 7 days a week
- 16 years of chimney and fireplace experience
- Warranty starts from 2 years
Get a fast quote
Open 24/7Same-day serviceWarranty from 2 years16 years of experienceChimney & gas fireplace serviceClear advice, no upsellsChimney Leak Repair in Minneapolis: Follow the Water Trail
A ceiling stain appears near the fireplace
Water can travel from the chimney or roof connection before showing inside, so the stain alone may not reveal the entry point. We check the chimney and the surrounding roof area to locate the source.
The roof is leaking around the chimney
The flashing where the chimney meets the roof may be damaged or no longer keeping water out. We assess that joint and determine whether flashing repair or another chimney repair is needed.
You see cracks or deterioration on the chimney
Cracked masonry or a damaged crown can let water reach parts of the structure that should stay protected. We inspect the visible damage and identify whether masonry, crown, or waterproofing work fits the problem.
Water appears near the top of the chimney
A damaged or missing cap can leave the chimney opening exposed to rain. We check the cap along with other possible entry points before recommending a repair.
The leak returns after a previous repair
Recurring moisture can mean the original repair did not address the point where water enters. We look at the chimney and roof junction as a whole rather than assuming the same repair will solve it.
What Chimney Leak Repair Can Address
- Check the chimney and roof junction — We examine the area where the chimney passes through the roof to look for signs of water entry and damage.
- Assess chimney flashing — We check the flashing for damage that could allow water through, then determine whether chimney flashing repair is needed.
- Inspect the crown and masonry — Visible cracks or deterioration can point to places where water reaches the chimney structure. We assess whether crown repair, masonry repair, or tuckpointing is appropriate.
- Check the cap or chase cover — We look for damage or openings at the top of the chimney and identify whether chimney cap installation or chase cover replacement is called for.
- Consider chimney waterproofing — Where the condition of the chimney calls for it, we can provide chimney waterproofing as part of the repair plan.
- Explain the recommended work — We describe what we found and recommend only services the homeowner needs, so you can see how the proposed repair relates to the source of the leak.
Need help now? (612) 806-0154
How We Trace and Repair a Chimney Leak
- Share what you have noticed — When you book, tell us where water shows up, when you first noticed it, and whether the leak returns during or after rain. You do not need to diagnose the cause; those details help direct the inspection.
- We inspect likely entry points — We assess the chimney and the roof connection, including the flashing and visible chimney components that may be letting water in. The location of indoor staining helps guide the check, but does not by itself prove the source.
- We explain the repair plan — After checking the problem, we explain the work we recommend and why it addresses the water entry. The plan may involve flashing, crown, masonry, cap, chase cover, or waterproofing work, depending on what we find.
- We complete the agreed repair — We carry out the repair based on the identified issue and go over the completed work with you. Visit length depends on the repair needed, the extent of the damage, and access to the affected area.
What Shapes the Cost of Chimney Leak Repair
The cost depends on where water is entering and what needs repair. A flashing issue may call for different work than damaged masonry, a cracked crown, a failed cap, or a leak involving a chimney chase cover. The extent of the damage and access to the affected area also affect the job.
Chimney leak repair does not have a listed starting price in our service pricing. We assess the problem and explain the recommended work so you can understand what the repair covers before it begins. To arrange an assessment, request a quote.
Need help now? (612) 806-0154
Why Minneapolis-Area Homeowners Choose MN Chimney Sweep
Owner Garrett Sullivan brings 16 years of experience with chimneys and fireplaces to the work. We serve Minneapolis, St. Paul, and Twin Cities metro communities within 50 miles, traveling to the customer’s home, and we explain the work clearly rather than recommending repairs you do not need. Our work comes with a warranty starting from 2 years. For related help, see our chimney repair service or learn about a chimney sweep.
Related services
Guides on chimney leak repair
Frequently asked questions
What affects chimney leak repair cost?
The price depends on the source of the leak, the repair required, how extensive the damage is, and access to the affected area. We inspect the problem and explain the recommended work before starting.
How do you fix a leaking chimney?
First, we look for where water enters, checking the roof connection and relevant chimney components. We then recommend the repair that matches the cause, which may involve flashing, masonry, the crown, a cap, a chase cover, or waterproofing.
What should I check when water appears where the roof meets my chimney?
A roof leaking around a chimney can involve flashing, but water may also enter through a damaged crown, masonry, cap, or chase cover. Interior stains do not always sit directly below the entry point, so an inspection helps locate the source.
Could a chimney water leak come from the crown or cap?
Yes, a damaged crown or a cap that no longer protects the opening can allow water into the chimney. We check those areas along with the roof connection so the repair addresses the source we find.
How can I tell if the problem is a chimney flashing leak?
A chimney flashing leak is one possible cause when water shows up near the chimney-roof joint, but a stain alone cannot confirm it. We inspect the flashing and surrounding areas before recommending repair.
Do you serve St. Paul as well as Minneapolis?
Yes. We serve St. Paul and communities across the Twin Cities metro area within 50 miles, traveling to the customer’s home. You can also read about our chimney sweep in Minneapolis service.
Get the Leak Source Checked
Tell us where you see water and arrange an assessment. We’ll identify the repair needed and explain the work before it begins.