How Much Does Chimney Repair Cost in Minneapolis, MN?
Listed chimney work starts at $39 for an inspection, $89 for cleaning, $125 for a cap, and $899 for a liner; chimney repair cost depends on the work needed. Call (612) 806-0154 to schedule an assessment.
Our Starting Prices in Minneapolis
| Service | Price |
|---|---|
| Chimney Sweep | From $89 |
| Chimney Cleaning | From $89 |
| Chimney Inspection | From $39 |
| Chimney Cap Installation | From $125 |
| Chimney Liner Installation | From $899 |
| Gas Fireplace Service | From $49 |
Need help now? (612) 806-0154
What Chimney Repair Cost Covers
The listed starting prices are for specific services, not a single rate for every chimney repair. Chimney inspection starts at $39, chimney cleaning at $89, chimney cap installation at $125, and chimney liner installation at $899. The repair needed and the work involved determine which service applies.
A visit can identify a condition that needs a repair, but an inspection is not the same service as repairing a chimney. Ask what work the recommendation includes and whether it is a repair, cleaning, or installation. You can compare the listed services and our prices before deciding what to authorize.
For an overview of repair options, see our chimney repair service. MN Chimney Sweep explains the work clearly and recommends only services a homeowner needs.
Which Chimney Conditions Change the Repair Scope?
The condition you notice can point to different parts of the chimney, so a visible symptom alone may not identify the repair. These clues can help you describe the problem when you book; they are not a substitute for an inspection.
- Water marks or dampness — A stain near the fireplace or chimney can lead to a check of the cap, crown, flashing, masonry, or chimney chase cover. The source matters because a leak repair may involve a different component than replacing a cap.
- Cracked or missing mortar — Visible gaps between bricks may call for masonry repair or tuckpointing, while wider or more extensive damage may need a different repair plan. Note where the gaps appear and whether you can see them from the ground.
- A damaged liner or poor draft — Liner damage and smoke entering the room are different concerns, and each needs an assessment before selecting work. A liner installation has a listed starting price of $899; that is not a price for every liner repair or chimney problem.
- A loose or damaged cap — A missing or damaged cap can expose the flue opening to the elements. Cap installation starts at $125, but the condition of the existing cap and the work required should be assessed before treating installation as the right solution.
Three Chimney Repair Situations and Their Starting Prices
A homeowner who sees water around the chimney may need an assessment before anyone can identify whether the issue involves the cap, crown, flashing, or masonry. Chimney inspection starts at $39; that is the inspection starting price, not a repair quote or a promise that a repair will be needed.
A damaged cap may lead to cap installation, which starts at $125. That figure applies to the listed installation service; it should not be treated as the cost of every cap-related repair or as a total for other chimney work.
A chimney that needs a new liner may involve liner installation, starting at $899. The inspection findings and the specific work recommended clarify whether liner installation fits the situation. For details focused on that service, read how much chimney liner installation costs.
These examples keep inspection and installation prices separate from the cost of repairs that have not yet been identified. Ask which listed service matches the recommended work, what it includes, and whether any additional repair is part of the same scope.
Need help now? (612) 806-0154
Inspection, Targeted Repair, or Replacement: Which Fits?
The right next step depends on what is damaged and whether the chimney can continue to serve the appliance safely. A professional assessment helps distinguish a specific repair from a larger replacement.
Start with an inspection
Choose an inspection when you have a symptom but do not know its source, or when you need the chimney checked before authorizing repair work. CSIA homeowner guidance notes the NFPA 211 recommendation for an inspection at least once a year; see the CSIA homeowner resources for inspection and sweeping guidance.
Use a targeted repair for a localized issue
A repair may fit when the assessment identifies a specific component or area that needs work, such as masonry, flashing, or a damper. Ask which part is affected and how the proposed work addresses that condition.
Consider replacement when repair is not the recommended scope
A liner installation or chimney rebuild is a larger type of work than a localized fix. Have the condition assessed before choosing between repair and replacement; the inspection findings should explain why one scope is recommended over the other.
How to Prepare for a Chimney Repair Assessment
Use these steps to give the sweep useful information without climbing onto the roof or trying to open or repair chimney parts yourself. Ask for the expected visit length when booking: an inspection, a cleaning, and repair work have different scopes.
- Note the symptom — Write down what you noticed, such as a leak, visible masonry damage, or smoke entering the room, and when it happens. Check that you can describe the location without approaching a damaged area.
- Stop using a fireplace that sends smoke indoors — Do not keep using the appliance while smoke is entering the living space. Note whether the problem happens at startup or during a fire, and tell the sweep; do not attempt a repair from inside the flue.
- Take photos from a safe place — Use a phone camera to record accessible stains, loose material, or visible exterior damage from the ground. Check that the photos show the location and surrounding area, and do not climb onto a roof to get a closer view.
- Gather appliance and work details — Have the fireplace or appliance type and any known prior chimney work ready to share. Check your notes for dates or paperwork that could help identify changes to the chimney or liner.
- Book an assessment — Call (612) 806-0154 or use the contact page to arrange a visit. Same-day service is available, and the business is open 24 hours a day, 7 days a week.
- Ask what the inspection covers — Describe the symptoms and ask what the assessment will examine. A Level 2 inspection is recommended in situations such as an appliance change, sale, relining, or a fire or weather event; the CSIA procedure calls for a video scan during that inspection.
- Review the proposed work before approving it — Ask which part needs attention, what work is included, and which listed service price applies. Check that the recommendation addresses the condition you reported rather than adding unrelated services.
- Check the completed work and paperwork — After the work, review the description of what was done and keep the paperwork with your chimney records. MN Chimney Sweep work comes with a warranty starting from 2 years; check the provided terms for the work covered.
When Chimney Damage Calls for a Sweep
Do not treat visible damage as a do-it-yourself masonry or liner repair. Chimneys include parts that are difficult to assess from the living area, and an incorrect repair can leave the original problem in place.
- Call about visible cracks or loose masonry — Describe where the damage is and whether it has changed. Avoid pulling at loose material or applying patching products before the chimney is assessed.
- Arrange an assessment for water intrusion — Report stains, dampness, or water near the chimney and note where you see them. Keep photos taken from a safe location so the sweep can understand what you observed.
- Stop using the fireplace if smoke enters the room — Record when the smoke appears and arrange a chimney check before using the fireplace again. Smoke entering the room is a sign to investigate the chimney or appliance, not a condition to cover up with a quick patch.
- Get a professional assessment before changing a liner — A liner is part of the chimney system, so do not attempt to remove or replace it yourself. Ask a sweep to assess the existing condition and explain whether repair or installation is the recommended scope.
Need help now? (612) 806-0154
What an Inspection Can Clarify Before Chimney Repairs
An inspection can help locate the problem before repair work is selected. It is especially important to ask about a Level 2 inspection after an appliance change, before a sale, when relining, or after a fire or weather event. The CSIA Level 2 inspection procedure specifies a video scan for that inspection.
A video scan is not a promise that every repair will be visible or that a particular repair will be needed. The useful outcome is a clearer picture of the chimney’s condition and a specific explanation of the recommended work. For the inspection starting price and more detail, visit how much a chimney inspection costs.
MN Chimney Sweep serves Minneapolis, St. Paul, and Twin Cities metro communities within 50 miles. Garrett Sullivan brings 16 years of experience with chimneys and fireplaces, and the company explains the work before recommending services.
Frequently asked questions
Can I fix my own chimney?
You can record symptoms and take photos from a safe place, but leave masonry, liner, flashing, and other chimney repairs to a professional. Avoid climbing onto the roof or using the fireplace when smoke is entering the room; arrange an assessment first.
Does the $39 chimney inspection price include repairs?
The $39 starting price is for a chimney inspection, not a repair. Ask which work is recommended after the condition is assessed and whether its listed starting price applies.
How do I know whether my chimney needs repair or replacement?
Visible symptoms do not always identify how much of the chimney is affected. An inspection can help establish whether a localized repair, liner installation, or larger rebuild is the appropriate scope.
How do I arrange a chimney repair visit?
Call (612) 806-0154 or send a request through the contact page with the symptom and appliance type. Ask for the expected visit length when booking, since an inspection and repair work involve different scopes.
Arrange a Chimney Assessment
Call (612) 806-0154 to describe the problem and book a visit.